The neck block has been cut to rough profile and the channel for the re-enforcement rods has been routed. The headstock overlay has been thickness sanded and the fretboard has been cut and rounded to a 12" radius.
The sides have been bent to shape and clamped against a form until they are completely dry.
The body was carved to rough profile using a router. Each ring is routed in 1/32" increments.
Then using palm and thumb planes, the plate is carved to it's final shape.
The sides have been bent to shape and clamped against a form until they are completely dry.
The body was carved to rough profile using a router. Each ring is routed in 1/32" increments.
Then using palm and thumb planes, the plate is carved to it's final shape.
No comments:
Post a Comment